Talos now supports booting on UEFI systems in SecureBoot mode. When combined with TPM-based disk encryption, this provides Trusted Boot experience.
Note: SecureBoot is not supported on x86 platforms in BIOS mode.
The implementation is using systemd-boot as a boot menu implementation, while the Talos kernel, initramfs and cmdline arguments are combined into the Unified Kernel Image (UKI) format. UEFI firmware loads the systemd-boot bootloader, which then loads the UKI image. Both systemd-boot and Talos UKI image are signed with the key, which is enrolled into the UEFI firmware. As Talos Linux is fully contained in the UKI image, the full operating system is verified and booted by the UEFI firmware.
Note: There is no support at the moment to upgrade non-UKI (GRUB-based) Talos installation to use UKI/SecureBoot, so a fresh installation is required.

​
SecureBoot with Sidero Labs Images

Sidero Labs provides Talos images signed with the Sidero Labs SecureBoot key via Image Factory.
Note: The SecureBoot images are available for Talos releases starting from v1.5.0.
The easiest way to get started with SecureBoot is to download the ISO , and boot it on a UEFI-enabled system which has SecureBoot enabled in setup mode. The ISO bootloader will enroll the keys in the UEFI firmware, and boot the Talos Linux in SecureBoot mode. The install should performed using SecureBoot installer (put it Talos machine configuration):
Note: SecureBoot images can also be generated with custom keys.

​
Booting Talos Linux in SecureBoot Mode

In this guide we will use the ISO image to boot Talos Linux in SecureBoot mode, followed by submitting machine configuration to the machine in maintenance mode. We will use one the ways to generate and submit machine configuration to the node, please refer to the Production Notes for the full guide. First, make sure SecureBoot is enabled in the UEFI firmware. For the first boot, the UEFI firmware should be in the setup mode, so that the keys can be enrolled into the UEFI firmware automatically. If the UEFI firmware does not support automatic enrollment, you may need to hit Esc to force the boot menu to appear, and select the Enroll Secure Boot keys: auto option.
Note: There are other ways to enroll the keys into the UEFI firmware, but this is out of scope of this guide.
Once Talos is running in maintenance mode, verify that secure boot is enabled: Now we will generate the machine configuration for the node supplying the installer-secureboot container image, and applying the patch to enable TPM-based disk encryption (requires TPM 2.0): 
# tpm-disk-encryption.yaml
machine:
  systemDiskEncryption:
    ephemeral:
      provider: luks2
      keys:
        - slot: 0
          tpm: {}
    state:
      provider: luks2
      keys:
        - slot: 0
          tpm: {}
Generate machine configuration: Apply machine configuration to the node: Talos will perform the installation to the disk and reboot the node. Please make sure that the ISO image is not attached to the node anymore, otherwise the node will boot from the ISO image again. Once the node is rebooted, verify that the node is running in secure boot mode:

​
Upgrading Talos Linux

Any change to the boot asset (kernel, initramfs, kernel command line) requires the UKI to be regenerated and the installer image to be rebuilt. Follow the steps above to generate new installer image updating the boot assets: use new Talos version, add a system extension, or modify the kernel command line. Once the new installer image is pushed to the registry, upgrade the node using the new installer image. It is important to preserve the UKI signing key and the PCR signing key, otherwise the node will not be able to boot with the new UKI and unlock the encrypted partitions.

​
Disk Encryption with TPM

When encrypting the disk partition for the first time, Talos Linux generates a random disk encryption key and seals (encrypts) it with the TPM device. The TPM unlock policy is configured to trust the expected policy signed by the PCR signing key. This way TPM unlocking doesn’t depend on the exact PCR measurements, but rather on the expected policy signed by the PCR signing key and the state of SecureBoot (PCR 7 measurement, including secureboot status and the list of enrolled keys). When the UKI image is generated, the UKI is measured and expected measurements are combined into TPM unlock policy and signed with the PCR signing key. During the boot process, systemd-stub component of the UKI performs measurements of the UKI sections into the TPM device. Talos Linux during the boot appends to the PCR register the measurements of the boot phases, and once the boot reaches the point of mounting the encrypted disk partition, the expected signed policy from the UKI is matched against measured values to unlock the TPM, and TPM unseals the disk encryption key which is then used to unlock the disk partition. During the upgrade, as long as the new UKI is contains PCR policy signed with the same PCR signing key, and SecureBoot state has not changed the disk partition will be unlocked successfully. Disk encryption is also tied to the state of PCR register 7, so that it unlocks only if SecureBoot is enabled and the set of enrolled keys hasn’t changed.

​
Other Boot Options

Unified Kernel Image (UKI) is a UEFI-bootable image which can be booted directly from the UEFI firmware skipping the systemd-boot bootloader. In network boot mode, the UKI can be used directly as well, as it contains the full set of boot assets required to boot Talos Linux. When SecureBoot is enabled, the UKI image ignores any kernel command line arguments passed to it, but rather uses the kernel command line arguments embedded into the UKI image itself. If kernel command line arguments need to be changed, the UKI image needs to be rebuilt with the new kernel command line arguments.

​
SecureBoot with Custom Keys

​
Generating the Keys

Talos requires two set of keys to be used for the SecureBoot process:
  • SecureBoot key is used to sign the boot assets and it is enrolled into the UEFI firmware.
  • PCR Signing Key is used to sign the TPM policy, which is used to seal the disk encryption key.
The same key might be used for both, but it is recommended to use separate keys for each purpose. Talos provides a utility to generate the keys, but existing PKI can be used as well: The generated certificate and private key are written to disk in PEM-encoded format (RSA 4096-bit key). The certificate is also written in DER format for the systems which expect the certificate in DER format. PCR signing key can be generated with: The file containing the private key is written to disk in PEM-encoded format (RSA 2048-bit key). Optionally, UEFI automatic key enrollment database can be generated using the _out/uki-signing-* files as input: These files can be used to enroll the keys into the UEFI firmware automatically when booting from a SecureBoot ISO while UEFI firmware is in the setup mode.
Note: UEFI decides what Secure Boot trusts. By default, talosctl gen secureboot ... generates a self-signed UKI signing certificate and PK.auth/KEK.auth/db.auth for enrollment. You can also generate your own version of these files which uses other signing keys and certificate authorities specific to your environment.

​
Generating the SecureBoot Assets

Once the keys are generated, they can be used to sign the Talos boot assets to generate required ISO images, PXE boot assets, disk images, installer containers, etc. In this guide we will generate a SecureBoot ISO image and an installer image. Next, the installer image should be generated to install Talos to disk on a SecureBoot-enabled system: The generated container image should be pushed to some container registry which Talos can access during the installation, e.g.: The generated ISO and installer images might be further customized with system extensions, extra kernel command line arguments, etc.