Talos
Omni
Kubernetes Guides| Field | Type | Description | Value(s) |
|---|---|---|---|
name | string | Name of this end of the veth pair. This is a literal kernel interface name. Link aliases are not supported here because the interface is created by this document rather than selected from existing physical links. | |
peer | VethPeerConfig | Configuration for the peer end of the veth pair. | |
up | bool | Bring the link up or down. If not specified, the link will be brought up. | |
mtu | uint32 | Configure LinkMTU (Maximum Transmission Unit) for the link. If not specified, the system default LinkMTU will be used (usually 1500). | |
addresses | AddressConfig | Configure addresses to be statically assigned to the link. | |
routes | RouteConfig | Configure routes to be statically created via the link. | |
multicast | bool | Set the multicast capability of the link. |
peer
VethPeerConfig is the configuration for the peer end of a veth pair.| Field | Type | Description | Value(s) |
|---|---|---|---|
name | string | Name of the peer end of the veth pair. This is a literal kernel interface name. Link aliases are not supported here because the interface is created by this document rather than selected from existing physical links. Both endpoints are created in the host network namespace. This name can be listed in a VRFConfig document’s links field to attach the peer endpoint to that VRF. | |
up | bool | Bring the link up or down. If not specified, the link will be brought up. | |
mtu | uint32 | Configure LinkMTU (Maximum Transmission Unit) for the link. If not specified, the system default LinkMTU will be used (usually 1500). | |
addresses | AddressConfig | Configure addresses to be statically assigned to the link. | |
routes | RouteConfig | Configure routes to be statically created via the link. | |
multicast | bool | Set the multicast capability of the link. |
addresses[]
AddressConfig represents a network address configuration.| Field | Type | Description | Value(s) |
|---|---|---|---|
address | Prefix | IP address to be assigned to the link. This field must include the network prefix length (e.g. /24 for IPv4, /64 for IPv6). | |
routePriority | uint32 | Configure the route priority (metric) for routes created for this address. If not specified, the system default route priority will be used. |
routes[]
RouteConfig represents a network route configuration.| Field | Type | Description | Value(s) |
|---|---|---|---|
destination | Prefix | The route’s destination as an address prefix. If not specified, a default route will be created for the address family of the gateway. | |
gateway | Addr | The route’s gateway (if empty, creates link scope route). | |
source | Addr | The route’s source address (optional). | |
metric | uint32 | The optional metric for the route. | |
mtu | uint32 | The optional MTU for the route. | |
table | RoutingTable | The routing table to use for the route. If not specified, the main routing table will be used. |
addresses[]
AddressConfig represents a network address configuration.| Field | Type | Description | Value(s) |
|---|---|---|---|
address | Prefix | IP address to be assigned to the link. This field must include the network prefix length (e.g. /24 for IPv4, /64 for IPv6). | |
routePriority | uint32 | Configure the route priority (metric) for routes created for this address. If not specified, the system default route priority will be used. |
routes[]
RouteConfig represents a network route configuration.| Field | Type | Description | Value(s) |
|---|---|---|---|
destination | Prefix | The route’s destination as an address prefix. If not specified, a default route will be created for the address family of the gateway. | |
gateway | Addr | The route’s gateway (if empty, creates link scope route). | |
source | Addr | The route’s source address (optional). | |
metric | uint32 | The optional metric for the route. | |
mtu | uint32 | The optional MTU for the route. | |
table | RoutingTable | The routing table to use for the route. If not specified, the main routing table will be used. |