Upload and Manage Images

A content library stores the images that virtual machines boot from, such as installation ISOs. The library is declared in the machine configuration with a ContentLibraryConfig document. The files in it are managed over the Talos API with talosctl hypervisor content-library. This page shows how to create a library, and how to upload, verify, list, replace, and delete its files. In the commands on this page, replace <host-ip> with the IP address of the host that stores the library.

Create a content library

A content library lives on a Talos volume, and its files are stored at the root of that volume. The volume is declared in its own document, which can be one of the following:

A UserVolumeConfig, for a directory, partition, or disk on the host.
An ExistingVolumeConfig, for a volume that already exists on the host.
An ExternalVolumeConfig, for a volume mounted from outside the host, such as an NFS export. NFS support was added in Talos Linux v1.15.

The following steps declare a content library on a directory volume and check that it is ready.

Run the following command to create content-library.yaml, which declares a directory volume named vm-images and a content library named images that uses it:
cat <<'EOF' > content-library.yaml apiVersion: v1alpha1 kind: UserVolumeConfig name: vm-images volumeType: directory --- apiVersion: v1alpha1 kind: ContentLibraryConfig name: images backing: volume: vm-images EOF
The backing.volume field names the volume the library uses. The volume must follow these rules:
- It backs only one content library. Use a separate volume for each content library and each storage pool.
- It is writable, because uploads write into it.
The library’s name is its ID in the Talos API. It can contain only ASCII letters, digits, and hyphens, and can be up to 63 characters long.

Apply the documents to the host:

talosctl patch machineconfig --nodes <host-ip> --patch content-library.yaml

Check that the library is ready:
talosctl get contentlibrarystatuses --nodes <host-ip>
Talos reports the library’s state in a ContentLibraryStatus resource, with the following columns:
- PHASE is ready once the volume is mounted and the library accepts uploads.
- PATH is where the library’s files are stored on the host.
- ERROR explains why a library is not ready.
- VOLUME is the volume’s ID, which Talos derives from its name. For example, a UserVolumeConfig named vm-images has the ID u-vm-images.

Manage images

The commands in this section use the images library from Create a content library.

Upload an image

To upload a file into a content library, pass the library name and the path to the file:

talosctl hypervisor content-library upload images metal-amd64.iso --nodes <host-ip>

When the upload finishes, talosctl prints the SHA-256 and SHA-512 digests of the file the host received. The file keeps its own name in the library. To change the name or the source, add these options:

To store the file under a different name, add --name <name>.
To upload from standard input, pass - as the file and set its name with --name.

A library has no folders, so a file name follows these rules:

It cannot contain a path separator.
It cannot start with a dot.
It can be up to 230 characters long.

Verify an upload

To have the host check an upload, add --digest with the file’s expected digest. The digest takes the form sha256:<checksum> or sha512:<checksum>, where <checksum> is the file’s checksum in hexadecimal. The following example verifies a replacement of the file uploaded in the previous section, so it also includes --overwrite:

talosctl hypervisor content-library upload images metal-amd64.iso \
  --overwrite \
  --digest sha256:<checksum> \
  --nodes <host-ip>

The host stores the file only if its contents match the digest. If they don’t match, the host refuses the upload, and talosctl prints the digests of what the host received. Comparing those digests with the expected one shows whether the download was corrupted or the digest was mistyped.

Replace an image

The host refuses an upload whose name already exists in the library. To replace the existing file, add --overwrite:

talosctl hypervisor content-library upload images metal-amd64.iso --overwrite --nodes <host-ip>

A file that a running virtual machine uses cannot be replaced. To learn how a file is released, see Delete an image.

List images

To list the files in a library, run:

talosctl hypervisor content-library list images --nodes <host-ip>

The output shows each file’s name, size, and modification time.

Delete an image

To delete a file from a library, run:

talosctl hypervisor content-library delete images metal-amd64.iso --nodes <host-ip>

A file that a running virtual machine uses cannot be deleted. Talos releases the file when the virtual machine stops using it, which happens in any of these cases:

The virtual machine is removed.
The virtual machine’s powerState is set to stopped.
The disk that uses the file is removed, or changed to use a different file.

The file is released only after Talos updates the virtual machine in libvirt. A delete that runs right after one of these changes can still be refused because the file is in use. If that happens, retry after a few seconds.

Pin an image to a digest

A virtual machine refers to a library file by name, in the provision.fromImage section of a disk. A file can be replaced while no running virtual machine uses it, so a virtual machine can start with a different file under the same name. To make sure a virtual machine uses one exact file, add the file’s digest to the disk. Replace <checksum> with the file’s SHA-256 checksum:

disks:
  - name: install
    type: cdrom
    bootOrder: 1
    provision:
      fromImage:
        library: images
        file: metal-amd64.iso
        digest: sha256:<checksum>

Talos checks the file against the digest before it starts the virtual machine, and again whenever it reconciles the disk. If the file does not match, the disk is not ready:

A virtual machine that is not running does not start.
A running virtual machine is stopped.

Next steps

To boot a virtual machine from an uploaded image, see Run your first virtual machine.

Overview

Getting Started

Storage

Virtual Machines

Create a content library

Manage images

Upload an image

Verify an upload

Replace an image

List images

Delete an image

Pin an image to a digest

Next steps

​Create a content library

​Manage images

​Upload an image

​Verify an upload

​Replace an image

​List images

​Delete an image

​Pin an image to a digest

​Next steps

Create a content library

Manage images

Upload an image

Verify an upload

Replace an image

List images

Delete an image

Pin an image to a digest

Next steps